AV无码AV在线A∨天堂毛片

<bdo id="6asqw"><optgroup id="6asqw"><thead id="6asqw"></thead></optgroup></bdo>

<bdo id="6asqw"></bdo>

    1. <bdo id="6asqw"><dfn id="6asqw"><thead id="6asqw"></thead></dfn></bdo>
      
      

      <tbody id="6asqw"><div id="6asqw"></div></tbody>
      <track id="6asqw"></track>

      1. PRODUCTS CENTER
        Six unit two color code printing offset press
        PRODUCT PARAMETERS
        Introduction

        Based on the monochrome glue machine, the machine realizes the connection of multiple units reasonably, with compact structure, stable operation and simple operation. Especially in printing thin paper, it is far better than heavy machine. This machine can be used for many purposes, such as single color brush, multi-color printing and skip printing.

        product mix

        1. The ink part of each unit adopts three ink and one water structure.

        2. It adopts double diameter transfer roller of heavy machine, which is stable, firm and easy to maintain.

        3. With plate alignment, up and down fine-tuning, horizontal fine-tuning and oblique fine-tuning.

        4. Automatic pneumatic pressure, pneumatic water supply, ink supply, simple operation.

        5. Using domestic advanced PLC microcomputer control system, supplemented by man-machine interface, touch screen operation.

        Features of pneumatic control function

        1. Compared with the traditional electromagnet pull type structure, the plate cylinder, the imprint cylinder and the rubber cylinder adopt pneumatic pressure, which solves the problem of vulnerable blank in the pull rod mode. And the pressure is stable, the dot is clear, and the reducibility is good.

        2. Compared with the traditional electromagnet pull rod type, the pneumatic mode is adopted in the code dialing, especially in the case of code skipping in the printing matching carbonless copy paper, which has fast response and is not easy to make mistakes.

        3. Pneumatic control of vertical and horizontal rice noodles knife, instead of the traditional rice noodles can not jump at will, according to the need to set the number of jump. Pneumatic control can make the pressing pressure more stable.

        4. Automatic lubricating oil supply system. It can automatically lubricate the machine according to its operation.

        Function features of calling system:

        Resin plate relief printing, number printing and rice thread cutting are completed at one time.

        The horizontal number of the 47 printing press can be loaded at most

        7 lines × 7 columns = 49 / 9 rows × 7 columns = 63

        The vertical number of the 47 printing press can be loaded at most

        5 lines × 8 columns = 40 / 7 rows × 8 columns = 56

        Minimum spacing of rice noodle: wheel type vertical rice noodle cutter: 25mm; bar type horizontal rice noodle cutter: 5mm

        Resin plate printing size: roller type 90x345mm, local head type 30x40mm

        Technical parameter

        Machine model

        ZJ247IINP

        Paper size

        470x365mm

        Printing area

        450x345mm

        Plate size

        470x395x0.15mm

        Blanket size

        470x420x1.95mm

        Paper type

        28-250g/m2

        Number of rollers

        14 (3 inking rollers)

        NP system 6 (2 inking rollers)

        Number of water rollers

        4 pieces (1 pieces of water roller)

        Number spacing

        Vertical Code: 71mm in longitudinal direction, 48mm in transverse direction

        Horizontal Code: 47mm in longitudinal direction, 60mm in transverse direction

        Registration mechanism

        Roller type side draw gauge

        Printing speed

        2000-6000 sheets / hour

        Motor power

        Main motor 2.2kw/220v air pump motor 1.5kw/220v

        Machine dimensions

        2800x935x1400mm

        Machine weight

        1700kg


        Production process
        Sample
        Pro Details
        Pro Video

        <bdo id="6asqw"><optgroup id="6asqw"><thead id="6asqw"></thead></optgroup></bdo>
        
        

        <bdo id="6asqw"></bdo>

        1. <bdo id="6asqw"><dfn id="6asqw"><thead id="6asqw"></thead></dfn></bdo>
          
          

          <tbody id="6asqw"><div id="6asqw"></div></tbody>
          <track id="6asqw"></track>